CarboNET Setup
CarboNET
The CarboNET PMC translator allows you to connect
the control panel to the frame over ethernet. The
control panel connects to the CarboNET over the
standard serial link and then the CarboNET connects to
the frame over ethernet.
Note:
The CarboNET requires the frame to have a fixed IP
address so that it can connect to the frame. The frame must
either be set to a static IP address, or your DHCP server must
be set to always give the frame the same IP address.
Ports
USB
Note:
The USB and ethernet 2 ports are not available at this
time. Only one PMC port can be used at a time.
RESET
ETHERNET
1
2
PMC link
PS1
PS2 MODE
1 2 3 4
DIP
Switches
Network
Memory Card
PMC
Status LED
and Reset
Power
Power and Cabling
Important:
The cable to the control panel must
be CAT5e, or higher, Shielded Twisted Pair to a
maximum of 200m.
RESET
ETHERNET
1
2
PMC link
PS1
PS2 MODE
1 2 3 4
To Frame port
on control panel
Network
connection to
frame and
DashBoard
computer
Note:
It is recommended that you always connect the AC
Power Adapter to the device before connecting to Mains
Power.
Desk Mounting
CarboNET can be mounted under a desk using the
provided mounting bracket.
Mounting
Bracket
DIP Switches Control Panel DIP
Switches
The up position for the DIP switch is OFF.
DIP1 DIP2 DIP3 DIP4 Function
OFF OFF
User IP Settings
OFF ON
Force DHCP IP
ON OFF
Force Static IP (192.168.0.129)
ON ON
reserved
OFF
reserved
ON
reserved
OFF Default Boot
ON Boot from memory card
4805DR-100-03
©
2020 Ross Video Limited. Ross
®
, MiniME, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part
of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the
preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
