Carbide3D SHAPEOKO XXL Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 71

Carbide3D SHAPEOKO XXL Скачать руководство пользователя страница 71

[email protected]

69

Cutting Tutorials and Projects

Once you have implemented a workholding solution,

you’re ready to

tackle some beginner tutorials and projects!

The Star Wars Coaster Project is an excellent crash course on how to use your Shapeoko XXL. The tutorial walks you through
designing a simple set of coasters in Carbide Create and then executing the project with Carbide Motion. Follow the complete
project tutorial at:

docs.carbide3d.com/tutorials/project-coaster

.

More Beginner Tutorials

Once you’ve completed the coaster project, you can find more beginner cutting

tutorials on the Carbide 3D docs site. Each tutorial

will get you more comfortable using Carbide Create to set up your design and Carbide Motion to run the cutting project. Here are
a few great tutorials to get you started:

MAKE Makey Wall Plaque:

docs.carbide3d.com/tutorials/makey

Weber Sign:

docs.carbide3d.com/tutorials/tutorial-signs/weber-sign

Nerd Coasters:

docs.carbide3d.com/tutorials/project-nerdcoasters

Projects on CutRocket

Visit

, the Carbide 3D project site, to explore even more cutting projects for your Shapeoko XXL.

On CutRocket you’ll

find a wide variety of projects: signs, toys, games, tools, art, and storage and organization

—

and the complete project files for

each. These projects will level up your machining skills and get you inspired to create your own projects!

User Guides and Video Tutorials

As you get started running beginner projects with your Shapeoko XXL, we also recommend you browse through our Carbide 3D
docs pages:

docs.carbide3d.com

. We’ve packed

the docs site full of all kinds of useful information to help you get up and running

with your Shapeoko XXL, and to help answer common questions you might run into.

User Guides and Videos

Carbide Create Video Tutorials: Watch the videos at

docs.carbide3d.com/assembly/carbidecreate/video-tutorials

Carbide Motion User Guide: Check out the User Guide at

docs.carbide3d.com/assembly/carbidemotion/userguide

YouTube Channel: Check out the Carbide 3D YouTube channel for awesome tips and tricks, video tutorial projects, machining how-
tos, and new product releases at

youtube.com/carbide3d

Tooling and Tool-Change

Carbide 3D Tooling Guide: Learn about the different types of end mills (square, ball nose, and v-shaped) and how to choose the
right tool for your project at

docs.carbide3d.com/tutorials/tutorial-tooling

Tool Change Tutorial: Learn how to use multiple tools on a single job (excellent information about homing, job zero, and creating a
repeatable offset) at

docs.carbide3d.com/tutorials/tool-change

Shapeoko Feeds and Speeds Chart: This chart shows the cutting speed (how fast the machine goes through a given material using
a given cutting tool) and feed rate for different types of materials and different sizes and types of end mills.

docs.carbide3d.com/support/supportfiles/S3_feeds_250.jpg

Troubleshooting and How-To Guides

Can’t Connect to Machine or Jog:

docs.carbide3d.com/software-faq/can-t-connect-to-machine-or-jog

Tightening Eccentric Nuts to Tension V-Wheels:

docs.carbide3d.com/support/tensioning-eccentrics

Power Supply Usage (Is it Working?):

docs.carbide3d.com/shapeoko-faq/power-supply-usage

«
...
69
70
71

Содержание SHAPEOKO XXL








































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды