docs.carbide3d.com
12/2/19 v1.0
4
Route the Cable
The BitSetter cable is designed to route to your Carbide Motion controller one of two ways.
Routing Option 1
1.
Using the cutout on the bottom of the BitSetter, route the cable under the machine, directly back to
the controller.
2.
Use the included adhesive tie downs and zip ties to secure the cable to the machine. We recommend
one tie down immediately behind the BitSetter and another where the wire feeds out near the
controller.
Routing Option 2
1.
Using the cutout on the bottom of the BitSetter, route the cable around the front-left side of the
machine.
2.
Use the included adhesive tie downs and zip ties to secure the cable to your machine. Make sure the
cable is out of the way and fastened to your machine in convenient locations.
