CARBATEC.C OM.AU
Carbatec Pen Assembly Press
CT-PAP1 INSTRUCTIONS
GETTING READY
If you have the space on your workbench to
permanently mount your pen press, screw
it down to the bench top using the provided
countersunk holes.
(Fig. 01)
If you only require temporary mounting, you
can clamp it down to the bench top.
(Fig. 02)
Alternatively, clamp it up right in a bench vise.
It is important to have the pen press fastened
and secured to prevent damage to your
workpiece.
It is recommended to attach anti-scratch pads
on the face of the metal jaw to protect your pen
parts during assembly.
The pen press is designed to assist pressing a
wide range of pen styles and fits most pen kits.
Please refer to the specific instructions of your
pen kit for details.
Carbatec Pty Ltd
E
AU
1800 658 111
NZ
0800 444 329
128 Ingleston Road, Wakerley, Queensland Australia 4154
ABN 84 010 706 242
Fig. 01
Fig. 02
1
