Version 26.03.2019
HW:CAM(V98)/(V31)
P
a
g
e
12
Note:
The colours of the HSD+2 connectors at monitor and head unit may vary.
The picture signal cable’s connecting direction doesn’t have an impact on the system’s
function, for that the angled and not-angled HSD+2 connectors are allowed to be
interchanged, depending on the HSD+2 connectors mounting space at the monitor.
However, mixing up/interchanging the connections of
„HU IN“
and
„TO LCD“
may cause
dysfunktion or even damage to the system!
After the connections of the video interface have been done, carry out the following
technical checks:
2.5.
Analog power supply for the video interface
If, after connecting the PNP harness, no interface LED lightens up while the ignition is turned
on, the single red wire
ACC-out (max 3A)
and the purple coloured wire
Manual ACC
of the
12pin interface cable both have to be connected additionately to
S-contact
terminal 86s
+12V
(e.g. glove compartment illumination).
www.eldibg.com
car audio, multimedia & security systems
