1
Vigil geo OPERATING Instructions
Your Vigil geo is a very powerful device that can track, monitor and provide remote control from any cellular phone. In order
to make it as accessible and as simple to use as possible, we have provisioned Vigil at the factory to perform the more
common functions "out of the box". It has many capabilities that we do not mention here, so contact us for any special
requirements. First follow the separately provided instructions for the installation of the Vigil geo into your craft.
Loading SIMCARD
If your Vigil geo did not ship with a SIMCARD, follow the steps below. NOTE: YOU MUST disconnect all external power
supply connections when changing SIMCARD. This may mean unbolting the positive terminal or disconnecting the boat's
battery, while you do this.
Remove screws as shown in FIG. 1. Carefully slide out the Vigil circuit board.
Make sure the Battery is disconnected as seen in FIG. 4.
Remove the black Battery holder by releasing the clips from the main board one at the time. Locate the
SIMCARD holder see FIG. 2. Gently push the silver slide toward main holder body to release. Swivel
SIMCARD carrier up.
Insert an activated SIMCARD with the golden contact side facing downwards and the cut corner facing up as
shown. See FIG. 3
Hinge carrier closed. Slide silver slide back away from main body to lock.
Next, take the small white plug from standby battery and slide it into the power socket as shown in FIG 4.
This only goes in one way. Do NOT force.
You are now ready to load the phone numbers. Test with just one cellphone first, then load others later as
required.
