Care and maintenance
Cleaning
• Turn off the power, unplug the appliance and remove all items including shelves and rack.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should
be about two tablespoons of baking soda to one litre of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning the control panel or any
electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe
dry with a clean soft cloth.
Power failure
If a power failure is corrected within a f
e
w hours; it should not affect the temperature of
your appliance if you minimise the number of times the door is opened. If the power is
going to be off for a longer period you need to take action to protect the contents.
Holiday time
•
Short holidays:
Leave the wine cabinet operating during holidays of less than three weeks.
•
Long holidays:
If the wine cabinet will not be used for longer than 3 weeks, remove all
items and disconnect. Clean and dry the interior thoroughl
y.
To prevent odour and mould
growth, leave the door open slightly (blocking it open if necessary).
Moving your wine cabinet
• Remove all bottles.
• Securely tape down all shelves inside the cabinet.
• Turn the adjustable legs up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure and upright during transportation. Also protect the
outside of the wine cabinet (e.g. with a blanket).
Energy saving tips
The wine cabinet should be located in the coolest area of the room, away from heat-
producing appliances and out of direct sunlight.
Internal light
In order to reduce energy consumption, this wine cabinet will automatically switch off the L
ED
lights after
10
minutes.
If you want the L
ED
light to remain on continuously, this is possible.
P
lease press and hold the
"
LI
GH
T
"
button for
5
seconds, the display will show
"
L
P"
. After
4
seconds the display will revert
back to normal and the light will remain on until manually switched off.
If you want to revert back and conserve energy (recommended), please press and hold the
"
LI
GH
T
"
button for
5
seconds, the display will show
"
L
F"
, after
4
seconds the display will revert
back to normal, and the light will automatically switch off after
10
minutes.
8
