Instruction manual C816C
Instruction manual C816C
22
23
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
C O N N E C T I N G T H E H O B TO T H E M A I N S P O W E R S U P P LY
WARNING:
The power supply should be connected in compliance with the relevant standard,or a single-pole
circuit breaker. The method of connection is shown below.
› If the cable is damaged or needs replacing, this should be done by an after-sales technician
using the correct tools.
› If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker
must be installed with a minimum gap of 3mm between the contacts.
› The installer must ensure that the correct electrical connection has been made and that it
complies with safety regulations.
› The cable must not be bent or compressed.
› The cable must be checked regularly and replaced by authorised technicians only.
A D J U S T I N G T H E B R A C K E T P O S I T I O N
Fix the hob to the work surface by screwing 4 brackets on the bottom of hob (see picture) after
installation. Adjust the bracket position to suit different worktop thickness’s.
15
BBeeffoorree llooccaattiinngg tthhee ffiixxiinngg bbrraacckkeettss
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto any area.
Fix the hob to the work surface by screwing four brackets to the bottom of hob (see picture) after installation.
A
A
BB
C
C
D
D
screw bracket Screw
hole base
Adjust the bracket position to suit for different work surface’s thickness.
C
Caauuttiioonn
1. The ceramic hob must be installed by qualified personnel or technicians. We have professionals at your service.
Please never conduct the operation by yourself.
2. The ceramic hob must not be mounted to cooling equipment, dishwashers and rotary dryers.
3. The hob must be installed such that better heat radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface must withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
A
B
C
D
HOB
WORK SURFACE
A
HOB
WORK SURFACE
B
BRACKET
BRACKET
CAUTIONS:
› The ceramic hob should not be mounted next to cooling equipment, dishwashers
and rotary dryers.
› The wall and cooking zone above the work surface must withstand heat.
› To avoid any damage, the worktop sandwich layer and adhesive must be heat resistant.
