background image

Page 

10 

C770  user manual.DOC 

 

 
 
 
CAPLE "Built-in" Service 

Should  you  require  service  at  any  time,  please  contact  the 

Caple  Help  line  on  0870 

2411142. 
Caple 

have a nationwide service network of engineers who will respond quickly to your call. 

Always replace spare parts with genuine Caple spares. These are available from authorised 

Caple  Service  Centres 

or  by  mail  order  from  our 

National  Service  Stores,  simply 

telephone  0870  2411142. 

When  ordering  parts  always  quote  the  model  number  and 

serial number of your appliance. 
 
 

 

YOUR GUARANTEE 

CAPLE  guarantees  all  parts  of  this  product  for  one  year  from  the  date  of  purchase. 
During that time, should it become necessary CAPLE engineers will replace or repair all 
defective  parts  free  of  charge,  except  for  parts  subject  to  fair  wear  and  tear,  such  as 
light bulbs. 
Parts and the engineers labour costs are chargeable after the first 12 months. 
To qualify for benefits under the guarantee, you must be able to provide proof of date 
of purchase and the appliance must have been supplied, installed and used for domestic 
purposes only in accordance with CAPLE instructions. 
Consequential  losses  and  accidental  damage  to  the  product  are  not  covered  by  the 
guarantee. 
This guarantee does not affect your statutory or common law rights. 
CAPLE  cannot  be  responsible  for  the  results  of  using  this  appliance  for  any  other 

purposes other than those described in these instructions. 

Содержание C770G











Отзывы: