Instruction manual C2901
Please keep this instruction manual for future reference
20
USING THE ROTISSERIES
Instruction manual
Please keep this instruction manual for future reference
19
NOTE:
All functions with the rotisserie symbol can use this function by inserting the rotisserie
rod into the rotisserie motor at the back of the oven (see ‘using the rotisserie.’)
USING THE ROTISSERIE
12
T
he
rotisserie function
can be used in
a number of programmes on this oven
. After fitting the food on to the spit
(
S
)
,
block it with the two forks
(
F
)
. then proceed as follows:
-
Fit the knobs protection as shown in (fig. 6)
-
Position the spit support as shown in (fig. 6)
-
Fit the end of the spit into the motor M at the back of the oven.
-
Fit the support into the circular groove in the spit.
-
Unscrew and remove handle A.
-
Place the oven tray with a little water on the lowest shelf of the oven.
-
Partially close the oven door.
-
When the cooking time is up, screw the handle on the spit and remove everything from the oven. If necessary,
use an oven glove to avoid any burn
s.
Fig.6
Using the Rotisserie
•
Fix support (1) to the top of left side rack (2).
•
Insert the rotisserie pole (S) into the motor hole (M) on the right side of the oven.
Then fix it to support 1 also.
•
The Rotisserie will begin to work once a program with the Rotisserie function has
been selected and started.
Available Rotisserie functions:
Instruction manual
Please keep this instruction manual for future reference
19
NOTE:
All functions with the rotisserie symbol can use this function by inserting the rotisserie
rod into the rotisserie motor at the back of the oven (see ‘using the rotisserie.’)
USING THE ROTISSERIE
12
T
he
rotisserie function
can be used in
a number of programmes on this oven
. After fitting the food on to the spit
(
S
)
,
block it with the two forks
(
F
)
. then proceed as follows:
-
Fit the knobs protection as shown in (fig. 6)
-
Position the spit support as shown in (fig. 6)
-
Fit the end of the spit into the motor M at the back of the oven.
-
Fit the support into the circular groove in the spit.
-
Unscrew and remove handle A.
-
Place the oven tray with a little water on the lowest shelf of the oven.
-
Partially close the oven door.
-
When the cooking time is up, screw the handle on the spit and remove everything from the oven. If necessary,
use an oven glove to avoid any burn
s.
Fig.6
Using the Rotisserie
•
Fix support (1) to the top of left side rack (2).
•
Insert the rotisserie pole (S) into the motor hole (M) on the right side of the oven.
Then fix it to support 1 also.
•
The Rotisserie will begin to work once a program with the Rotisserie function has
been selected and started.
Available Rotisserie functions:
- Fix support (1) to the top of the left hand side rack (2)
- Insert the rotisseries pole (s) into the motor hole (M) on the right side of the
oven. Then fix it to support 1 also.
- The rotisseries will begin to work once a program with the Rotisseries
function has been selected and started.
Available Rotisserie functions:
C2901 Oven Instruction manual.indd 20
24/08/2017 12:36
