CAPITAL SPORTS 10031998, Руководство пользователя

Страница: 47 / 48

47
Troubleshooting
This treadmill is designed in a way that in the event of an electrical fault, the machine will turn off auto-
matically to prevent any injuries to the user and to prevent damage to the machine (i.e. motor).
When the treadmill behaves erratically, simply reset the treadmill by turning the power switch off, waiting
for 1 minute then turning the power button back on.
If, after you have reset the treadmill, it is still not running correctly, please run the self-checking analyse
(please refer to Self-Checking) to distinguish what type of error problem the machine is encountering.
Errorcode Cause and Solution
E0
No indication to safety key signal
Correctly insert the safety key.
E2
Over resistance or over load
Put lubrication on running deck.
E4
Motor burnt or demagnetization motor
Correctly connect motor wire or replace motor.
E5
Console wire unreliable connection
Replace console wire.
E6
Invalid hardware of MCB
Replace MCB
E7
Power supply
Check if the supply voltage is in the range of the working voltage or no
AC110V：AC90V~AC130V
AC220V：AC180V~AC250V
ERR
Incline VR error
Check the incline cable and self-inspect again.