Capintec CAPTUS 3000 Скачать руководство пользователя страница 309

Страница: 309 / 338

CAPINTEC, INC.

CAPTUS

3000

Figure 16-5

10. Click the appropriate radio button in the

Detector

frame to select the detector (Probe

or Well) that will be used for the measurements.

11. In the

Select Isotope

drop-down list box, select the Isotope that will be measured.

The ROIs appropriate for the detector and isotope will be filled in. These ROIs may be
edited or added to.

12. Click the

button or press

ALT+D

to save the entries and return to the

previous (Protocol Setup) screen (Figure 16-3).

13. On Figure 16-3, click the

button or press

ALT+N

when all the entries have

been made. The measurement setup window for the first measurement will appear as
shown in Figure 16-6.

November 13

CUSTOM PROTOCOLS

16-5

Содержание CAPTUS 3000



















































































































































































































































































































































Результаты поиска

Содержание CAPTUS 3000

Отзывы:

Capintec CAPTUS 3000, Руководство пользователя, Страница: 309 / 338

Результаты поиска

Содержание CAPTUS 3000

Отзывы: