Capintec CAPTUS 3000 Скачать руководство пользователя страница 262

Страница: 262 / 338

CAPINTEC, INC.

CAPTUS

3000

Figure 12-7

4. To stop the counting, click the

button or press

Alt+A

. The collected data is

discarded.

5. After the counting is complete, results are shown in the default Data mode. The data

modes are:

•

Raw Only

– To view raw data only.

•

Decay Corr Only

– To view decay corrected data only.

•

Raw and Decay Corr

– To view both (

default

To change the Data mode, click the appropriate radio button in the

Data

frame.

The data can be displayed as either a graph (

default

) or as a table.

•

Graph

– The data counts collected are displayed as a function of real time. The solid

line represents the Raw data and the dashed line represents the Decay Corrected
data.

•

Table

– Displays the measured counts in all ROIs in a tabular mode.

To change the Display mode, click the appropriate radio button in the

Display

frame.

The data can also be displayed over various ROIs (ROI 1 (

default

), 2, 3, 4). To change

the ROI, click the appropriate radio button in the

ROI

frame.

6. To print the results, click the

button or press

Alt+P

. Raw and decay corrected

data for all ROIs is printed in the table format along with graphs for each ROI.

7. To exit the Time Activity Analysis module and return to the CAPTUS

3000 Main screen,

click the

button or press

Alt+E

12-6

TIME ACTIVITY ANALYSIS

November 13

Содержание CAPTUS 3000



















































































































































































































































































































































Результаты поиска

Содержание CAPTUS 3000

Отзывы:

Capintec CAPTUS 3000, Руководство пользователя, Страница: 262 / 338

Результаты поиска

Содержание CAPTUS 3000

Отзывы: