Capetti Elettronica WSD12PS-4AI, Руководство пользователя, Страница: 11 / 12

WSD12PS-4AI
User Manual
PAGE 11
WA0285E_WSD12PS-4AI_User Manual_R06 V6.0
www.
capetti
.it
16. Mechanical dimensions.
Picture 12 - Mechanical dimensions
17. Warnings.
•
In case of batteries substitution, DO NOT disconnect the flat cable which connect the electronic boards without removing batteries
before
•
ALWAYS substitute all the batteries, also in case of one single battery exhausted
•
During the installation/configuration procedure, disconnect the jumper 10 to avoid transducers or devices connected to the PS output
(
Capetti ’s electronics is provided with short-circuit and over-absorption protections, but transducers can be damaged in case of wrong connections
or inverted polarities
).
•
Follow the manufacturer's suggested warm-up time (
time required to obtain a reliable measurement
) of the transducer.
•
Follow the manufacturer's suggested electric wiring of the transducer to measure (
ground shields at a single point, cable length and section
);
voltage measures on distances exceed 15/20 meters are subjected to electromagnetic disturbances. 0 ÷ 25mA inputs have a superior
electromagnetic compatibility (
EMC
).
•
• Avoid passage in cavities with power or high voltage cables.
•
The protection and safety measures and the warranty provided by the Manufacturer with the equipment may be compromised if it’s
used in a manner that does not comply with this user manual.
•
This equipment complies with CE regulations.
•
This equipment can receive any interference which could also cause unwanted behaviour.
•
Modifications or tampering not expressly approved by the Manufacturer could void the user's authorization to operate the equipment.
•
This equipment must be installed by qualified personnel.
•
The device has a weight of up to 0.450 kg. Make sure that the object is properly fixed to supports/infrastructures capable of
withstanding this load. Make sure proper methods and materials are used when fixing the equipment to a wall.
•
Only service personnel authorized by the manufacturer or personnel expressly authorized by the latter can open the container. There
are no user serviceable parts inside.