Adjusting the Armbar
BP 2620 - COMPACT
PLEASE KEEP INSTRUCTIONS FOR FUTURE REFERENCE
Safety guidelines and instructions must always be followed before making
use of this product,
please retain these instructions for future reference.
This product complies with product standard
AS/NZS 2088:2000
WARNING: TO AVOID INJURY OR DEATH:
PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
DO NOT LEAVE CHILDREN UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST
THE STROLLER, OTHERWISE THEY MAY BE INJURED.
USE THE HARNESS AT ALL TIMES.
WHEN NOT IN USE DISCONNECT SHOULDER STRAPS FROM THE WAIST STRAP
AND/OR BUCKLE.
The harness can form loops which may be a strangulation hazard. Never leave
a harness connected when not fitted to a child in the stroller
Care should be taken if the stroller is to be used on stairs or escalators.
FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
To avoid serious injury always use the harness provided to secure the child.
(Adjust the straps to suit the body size of your child)
Care should be taken whilst folding and unfolding stroller to prevent fingers
being trapped. Ensure your child’s fingers, hands and all other body parts are
clear from any moving
part when adjusting the seat or handle on your stroller.
This stroller should not be used near an open fire or an exposed flame.
It is unsafe to use accessories other than those supplied or approved by
Capella.
THE MAXIMUM WEIGHT FOR THE SEAT UNIT IS 18KG
THE MAXIMUM WEIGHT FOR THE BASKET IS 5KG
THE MAXIMUM TOTAL WEIGHT FOR THE STROLLER IS 23KG
WARNING
PARTS
How to Unfold
STEP 1. Release the latch (picture 1)
STEP 2. Apply pressure to each side of the handle
Bar outwards.
STEP 3. Set release on the Handle Bar (unlock)
(picture 2)
STEP 4. Push the handle upwards as well as pushing
backwards whilst pressing the handle button
(picture 3)
WARNING
*While in use, always set the
handle in the lock position.
*Make sure the stroller is fully
latched.
*Make sure that the guide holder
is placed under the holder.
1.
To Assemble
- Push the arm bar
into the armrest until it clicks in.
2.
To disassemble
- Detach the arm
bar from the armrest whilst pressing
the release buttons at the same time.
These are located on both sides of
the armrest.
STEP 1. Squeeze
the back adjusters
STEP 2. Adjust the
backrest to the
desired position.
Adjusting the Backrest
Adjusting the Wheels
* The front swivel lock should be used
on uneven surfaces such as grass,
stone or gravel.
* Push Button down be in swivel mode..
* Raise the button up to lock the swivels.
* Turn the swivel to ensure that it is
locked or released.
How to use the Brakes
*To Apply the Brakes - Push the brake
lever downwards.
* To release the brakes - Lift the brake
lever upwards.
WARNING
*
PUT ON ALL THE BRAKES WHENEVER
YOU PARK THE STROLLER.
* ALWAYS APPLY THE BRAKES WHENEVER
THE STROLLER IS STATIONARY.
Adjusting the Footrest
* The length of the Footrest can
be Adjusted by moving the
adjuster under the footrest.
