background image

 

EN - 1 

 

Wireless USB Adapter 

Article: CNP-WF518N3

 

Quick Guide v1.0

 

Package Contents 

1.

 

CANYON CNP-WF518N3 Main Unit 

2.

 

Driver CD 

3.

 

Quick Guide 

4.

 

Warranty Card

Hardware Overview 

 

 

 

 

 

Connecting to Device 

 

1.

 

Power on PC. 

2.

 

Insert the device into an USB 
2.0 slot. 

3.

 

Insert Driver CD into 
CD-ROM to start driver 
installation. 

NOTE
It is recommended to install driver 
from Driver CD for full functionali- 
ties. 

Installing Device Driver 

NOTE
Please click on Ok when prompted to install Unsigned Driver. This is a 
Windows system warning that indicates the specific driver program is not 
certified by Windows. 
 
1.

 

After inserting Driver CD, click on Setup.exe to launch driver 
installation process. 

WPS Button

USB Connector

Status LED 

Indicator 

Содержание CNP-WF518N3

Страница 1: ...Driver CD into CD ROM to start driver installation NOTE It is recommended to install driver from Driver CD for full functionali ties Installing Device Driver NOTE Please click on Ok when prompted to install Unsigned Driver This is a Windows system warning that indicates the specific driver program is not certified by Windows 1 After inserting Driver CD click on Setup exe to launch driver installat...

Страница 2: ...cess Connecting to Wireless Network Before setting up the device please make sure that wireless network is setup and access point wireless router is functioning properly Please follow below steps to join a specific wireless or encrypted network Using Configuration Utility 1 Double click on the desktop shortcut click on the icon as indicated or right click and click on Open Configuration Utility to...

Страница 3: ...nnection 5 Click on OK to complete connection process or Cancel to exit Using Configuration Utility 1 Click on the Start Æ Control Panel and then click on Network and Internet option 2 Click on Connect to a network option under Network and Sharing Center title ...

Страница 4: ... if prompted 6 The input name must be identical to the settings of wireless access point connecting to 7 Click on Next Connect to continue or Cancel to exit 8 Upon successful verification click on the options desired to enable disable functions 9 Click on Close to complete connection process Please refer to full manual on CD for more detailed operation information ...

Отзывы: