© 2019 Medivators Inc. All rights reserved. 50097-097 Rev D
Weekly Maintenance
1. Inspect connector blocks for wear and tear.
2. Lubricate and inspect manifold O-rings.
3. Clean Basin Drain screens.
4. Run Waterline Disinfection.
Monthly Maintenance
1. Replace Basin Drain filters.
2. Clean Spray Arm filters.
Six Month Maintenance
1. Replace 0.1 micron Water Filter, 1.0 micron Water
Filter, and 0.4 micron Water Filter every 6 months
or if below 35 psi.
2. Replace Vapor Management filter (if applicable).
3. Run Waterline Disinfection (if applicable).
4. Replace Air Filters.
MAINTENANCE
TROUBLESHOOTING
Error Reports
1. Error Types: System, Bar Code, Endoscope,
Reprocessing, Control, Warnings.
2. Operator Messages and Program Errors:
Appear in Reports Field.
3. Color-Coded Program Status: Orange, gray,
red, blue.
4. Canceling and restarting a program.
Software System Programs
1. Open LIO (Logic Input/Output): Main software to
run an endoscope reprocessing cycle.
2. Management: Database for user and run/cycle
information.
3. Server : Controls communication between LIO,
Management and ADVANTAGE PLUS™ Endoscope
Reprocessor and networked units (only available
to System Administrators).
4. Server Software.
Management Programs
1. General Applications: Cycles, Events, Instruments/
Endoscopes, Users, Physicians/Assistants.
2. Entering data specific to facility.
3. Data Management/Printing.
4. Backups: Perform regularly and initiate manually.
5. Importing/Exporting Data.
SYSTEM ADMINISTRATION
Data Entry with Barcoding
1. Data fields.
2. Adding Endoscope Types, Parameters Sets,
and New Endoscopes.
3. Adding Users/Operators and Physicians/Assistants.
4. Editing and Deleting Data.
Reports: Run/Cycle Data Recorded
1. View Cycle Logs: Open Management in MDS folder.
2. Select report criteria, time period and run reports
and details.
3. Other Reports: Events.
4. Printing Reports.
Medivators Customer and Technical Support Toll Free: Phone: 1-800-444-4729
·
www.medivators.com
This Medivators guide, form, checklist or procedure is designed for use solely as a customer education tool, and is not intended to replace or in any way modify the Medivators User and Service
Manuals. While Medivators training may be used in support of a facility’s overall competency program, it shall not constitute certification of facility personnel. Medivators shall in no event,
be held responsible for a facility’s proper performance of endoscope reprocessing protocols or a facility staying current and compliant with ongoing instructional changes or corresponding
training updates. Facility owners and operators of Medivators equipment are fully responsible for complying with industry standards and manufacturer’s proper use instructions.
FOR FACILITY USE ONLY
Staff Name:
Training Date:
Trainer:
Endoscope Reprocessor
TM
IN-SERVICE GUIDE
