43
-
Recording movies under fluorescent lights:
If the screen starts to flicker, select
[
PROGRAM AE] and set the shutter
speed to 1/100.
- The shutter speed resets to [
AUTO]
when you set the mode switch to
or change the recording program.
LCD Video Light
You can use the LCD video light to
record in completely dark places. For a
brighter picture, we recommend
keeping a distance of about 20 cm -
60 cm (8 in. - 2 ft.) from the subject
and/or using the [
NIGHT] recording
program. When you activate the LCD
video light, rotate the LCD panel to face
the subject and use the viewfinder
instead (
32).
[
LCD LIGHT OFF]
[
LCD LIGHT ON]
Press (
)
• The LCD display turns entirely
white when used as the video light.
Use the viewfinder instead.
• Using the viewfinder, select
[
LCD LIGHT OFF] to turn the
LCD video light off.
Self Timer
POINTS TO CHECK
: Set the camcorder to record
pause mode.
1
Activate the self timer.
[
MENU]
[
CAMERA SETUP]
[SELF TIMER]
[
ON]
2
Press
to close the menu.
•
appears.
• Set [SELF TIMER] to [
OFF] to
cancel the self timer.
3
Press
on the camcorder
to start recording.
• The camcorder starts recording
video (
mode) or takes a
still image (
mode) after a
10-second countdown. The
countdown appears on the screen.
• You can also press
(
mode) or
(
mode) on the wireless
controller. In that case, the
countdown will be only 2 seconds.
NOTES
Once the countdown has begun, you can
press
again
or turn off the
camcorder to cancel the self timer.
(
FUNC.
FUNC.
(
FUNC.
FUNC.
FUNC.
Start/Stop
START/STOP
PHOTO
Start/Stop
CO
PY
