background image

3

3-32

Performing Setup from the Control Panel

Polling Interval options

NetWare Server Poll Interval in Seconds 
1-3600 [15]

Specify the interval, in seconds, at which the ColorPASS communicates with the 
Novell print server to see if there are print jobs waiting. 

N

OTE

:

If you select a short interval, the amount of network traffic increases. This may 

slow down other network jobs.

Windows Setup options

Network Setup

Service Setup

PServer Setup

Polling Interval

Whether you are using NDS or Bindery services, choose Polling Interval from the 
main PServer Setup menu. If you do not reset the interval, the default value of 15 
seconds is used.

Network Setup

Service Setup

Windows Setup

Enable Windows Printing
Yes/No [Yes]

Enabling Windows Printing enables SMB (Server Message Block), the file and 
printer sharing protocol built into Windows. Enabling SMB allows the ColorPASS 
to be listed on the network so that Windows clients can print to a particular print 
connection (Hold, Print, or Direct) on the ColorPASS without any other 
networking software. For information on how to set up a Windows computer for 
Windows printing, see Getting Started. Windows printing runs via TCP/IP, so 
TCP/IP must be configured on the ColorPASS and on all workstations that use 
Windows printing.

Содержание Z5000









































































































































































Отзывы: