Canon Z5000, Руководство по настройке

Страница: 28 / 168

2
2-2 Preparing for ColorPASS Setup
In addition, you can enable the Printed queue, which is a storage area for the most
recent jobs from the Print queue. The Printed queue makes it convenient to reprint
those jobs. In Setup, you enable the Printed queue and specify the maximum number
of jobs retained in it (see page 3-8). Reprinting jobs in the Printed queue requires the
job management tools.
Hold queue
Jobs sent to the Hold queue are spooled to the ColorPASS hard disk for printing at a
later time or for repeated printing. Because the Hold queue is a storage place, jobs sent
to it cannot proceed through the printing process without intervention via the job
management tools (see the Job Management Guide).
Print queue
This is the standard ColorPASS queue. Jobs sent to the Print queue are processed and
printed in the order they are received. Jobs prioritized by an operator from the job
management tools and jobs sent via the Direct connection can take priority over jobs
sent to the Print queue.
To use the Fiery utilities and Fiery WebTools, you must enable either the Hold queue
or the Print queue.
Direct connection
The Direct connection transmits jobs directly to the ColorPASS, but only when the
ColorPASS is not processing another job. If the ColorPASS is busy, the job remains at
the user workstation until the ColorPASS is ready. The job is then processed as soon as
the previous job is finished and before the next queued job is processed.
Jobs sent to the Direct connection are not stored on the ColorPASS hard disk, and
they cannot be selected for reprinting, moving, or deletion. Therefore, the Direct
connection provides a measure of security for sensitive files. Jobs sent to the Direct
connection do appear in the Job Log, for accounting purposes.
You cannot use the Direct connection for lpd printing over TCP/IP.
N
OTE
:
To download fonts to the ColorPASS, you must publish the Direct connection.