Canon XF705, Инструкция по эксплуатации

Страница: 52 / 231

Changing Main Function s with the FUNC Button
52
Changing Main Function s with the FUNC Button
You can adjust three main functions—shutter speed, white balance and gain—using the FUNC button (direct
setting mode).
This section will explain the basic operation of the direct setting mode. For specific details about the functions
refer to the each function’s section: shutter speed (
A
53), white balance (
A
65), gain (
A
56).
U s ing the Direct S etting Mode
1 Pre ss the FUNC button.
• The onscreen display of the function to be adjusted will be
highlighted in orange.
• Press the FUNC button repeatedly or push the joystick left/
right to select the function you wish to adjust:
- White balance mode
- Color temperature value
- Color compensation (CC) value
- Gain value
- Shutter speed, angle or frequency
2 Pu s h the joy s tic k up/down to s elect the de s ired value or
white balance mode and then pre ss S ET.
• The selected value will be set and the camcorder will exit the direct setting mode.
• The onscreen display of the selected function will return to normal.
• Depending on the function selected, additional adjustment may be possible or necessary before pressing
SET.
NOTES NOTES
• The camcorder will automatically end the direct setting mode in the following cases.
- If no operation was performed for more than 6 seconds.
- If the menu or a status screen was opened.
Operating modes: