Canon XF705, Инструкция по эксплуатации

Страница: 147 / 231

147
Applying a LUT to S creen s /Video Output s
A pplying a LUT to S creen s /Video Output s
While recording using special gamma curves, you can apply a LUT to the image displayed on the LCD screen,
viewfinder and external monitors (SDI terminal or HDMI OUT terminal). When a LUT is applied, the displayed
image will look as if a standard gamma curve were used, making it easier to check the image on the display
device used. To check the image on an external monitor, you will need a monitor that is compatible with the
video’s color space.
1 S elect the menu s etting corre s ponding to the de s ired s creen or output terminal.
>
[
¢ #
Monitoring Setup]
>
[LUT: LCD] (LCD screen), [LUT: VF] (viewfinder), [LUT: SDI] or
[LUT: HDMI] (respective terminal)
2 S elect the de s ired LUT and then pre ss S ET.
• The gamma curve and color space of the video output will change.
• If a LUT is not needed, select [Off].
• Repeat the procedure as necessary to apply a LUT to a different screen/output terminal.
Option s
* Available only for video output from the SDI terminal and HDMI OUT terminal.
** Available only for the LCD screen and viewfinder.
Operating modes:
Applied LUT
Output Setting s with LUT applied
De s cription
Gamma curve Color s pace
[Normal1 : BT.70 9 ]
[Normal2 : BT.70 9 ]
[Normal3 : BT.70 9 ]
[Normal4 : BT.70 9 ]
Normal 1
Normal 2
Normal 3
Normal 4
BT.70 9
LUT for viewing on the camcorder' s s creen or external monitor s
compatible with BT.70 9 s pecification s . The available LUT depend s on the
[Gamma] s etting in the cu s tom picture file.
[Wide DR : BT.70 9 ] Normal 1 BT.70 9
[Wide DR : BT.2020]* Wide DR BT.2020
LUT for viewing on external monitor s compatible with ITU-R BT.2020
s tandard s , which define parameter s for ultra-high-definition televi s ion
(4K/8K).
[PQ : BT.2020]* PQ BT.2020
LUT for viewing HDR (high dynamic range) image s on external monitor s
compatible with the PQ s tandard defined by ITU-R BT.2100. The s ignal
output will u s e narrow range (video range) coding.
[HLG : BT.2020]* HLG BT.2020
LUT for viewing HDR (high dynamic range) image s on external monitor s
compatible with the HLG s tandard defined by ITU-R BT.2100. The s ignal
output will u s e narrow range (video range) coding.
[HDR A ss i s t. (800%)]**
[HDR A ss i s t. (400%)]**
Original gamma
curve
BT.70 9
LUT for viewing HDR (high dynamic range) image s on the camcorder’ s
s creen s (LCD/viewfinder). The LUT follow s the BT.2100 tran s fer function
to convert a brightne ss range of 800% or 400% re s pectively into an
image that look s the s ame a s video di s played on an HDR-compatible
di s play.
[Off] – – No LUT applied.