Canon XF705, Инструкция по эксплуатации

Страница: 125 / 231

125
Cu s tom Picture S etting s
[ /
!
Cu s tom Picture
]
>
[Other Settings] Submenu (Detailed Settings)
[HLG Color] [BT.2100], [Vivid]
Change s the quality of color reproduction when u s ing the hybrid log gamma (HLG). Thi s s etting i s
only available when [Gamma] i s s et to [HLG].
[BT.2100]: Color reproduction according to ITU-R BT.2100 s pecification s .
[Vivid]: More s aturated color reproduction according to the 'Traditional Colour' approach in ITU-R
BT.23 9 0.
[Activate Other Setting s ] [On], [Off]
Set thi s s etting to [On] to enable the editing of the cu s tom picture’ s detailed s etting s explained in the
following table.
Menu item s Setting option s and additional information
[Black]*
[Ma s ter Pede s tal] –50 to 50 (±0)
Increa s e s or decrea s e s the black level. Higher s etting s will make dark area s brighter but decrea s e
contra s t. When [Gamma] i s s et to [Canon Log 3], thi s s etting i s not available.
[Ma s ter Black Red],
[Ma s ter Black Blue]
–50 to 50 (±0)
The s e s etting s correct the color ca s t in black s . When [Gamma] i s s et to [Canon Log 3], the s e s etting s
are not available.
[Black Gamma]*
[Level] –50 to 50 (±0)
[Range], [Point] –20 to 50 (±0)
The s e s etting s control the lower part of the gamma curve (dark area s of the image). When [Gamma]
i s s et to [Wide DR], [PQ], [HLG] or [Canon Log 3], the s e s etting s are not available.
[Level]: Rai s e s or lower s the lower part of the gamma curve.
[Range]: Select s the adju s tment range from the s elected [Point].
[Point]: Determine s the s hape of the lower part of the gamma curve.
[Low Key Satur.]*
[Activate] [On], [Off]
Set thi s s etting to [On] to enable the adju s tment of color s aturation in dark area s with the [Level]
s etting.
[Level] –50 to 50 (±0)
Specifie s how s aturated color s are in dark area s .
Menu item s Setting option s and additional information
Input
Ou
tput
[Point]
[ Range ]
[Level]