Canon XF605, Инструкция по эксплуатации

Страница: 71 / 238

71
Zoom
Using the Handle Zoom Rocker
You can set the zoom speed of the handle zoom rocker using
the menu.
1 S et the ZOOM s witch to ROCKER.
2 Move the zoom roc k er toward
T
to zoom out (wide-
angle) and toward
S
to zoom in (telephoto).
Handle zoom rocker: Approximate zoom s peed s (time required to zoom end-to-end)
* When the zoom speed is too fast, it will be more difficult to focus while zooming.
S etting the Zoom S peed (Handle Zoom Roc k er)
1 Select > [
v
Camera Setup] > [Zoom Speed Level] > Desired option (
A
70).
• The selected speed will also be applied to the handle zoom rocker.
2 Select > [
v
Camera Setup] > [Handle Zoom Speed] > Desired option.
U s ing a Remote Controller
You can operate the zoom using the RC-V100 Remote Controller or a commercially available remote control
connected to the camera. The zoom speeds will differ depending on the controller.
Zoom s peed s for remote operation
NOTES NOTES
• When an RC-V100 Remote Controller is connected to the camera, you can zoom with the remote controller’s
ZOOM dial. At default settings, turn the dial right to zoom in and left to zoom out.
[
v
Camera Setup] > [Handle Zoom Speed]
[
v
Camera Setup] > [Zoom Speed Level]
[Low] [Normal] [High]
[1] (slowest) 4 min 38 sec 2 min 1 min
[16] (fastest) 4.2 sec 2.6 sec 0.9 sec*
Accessory Zoom speed
RC-V100 Remote Controller (optional)
Variable speed: The greater the angle at which the RC-V100’s ZOOM dial is rotated from the center,
the faster the zoom.
Commercially available remote controls
If the remote control does not support variable zoom: Constant zoom speed.
If the remote control supports variable zoom: Variable zoom according to the remote control's
settings.
Browser Remote Fastest constant zoom speed. See the values under [16] in the previous table.