Canon XF605, Инструкция по эксплуатации

Страница: 67 / 238

67
White Balance
NOTES NOTES
• You can use the > [
v
Camera Setup] > [C. Temp. Increment] setting to change the units for the color
temperature increment to [Mired] (5-mired increments) or [Kelvin] (100-kelvin increments). Even when [Mired] is
selected, the color temperature is converted to and displayed in kelvins. Changing this setting may change the
white balance setting.
• If you set an assignable button to [
¼
Daylight], [
É
Tungsten] or [
È
Kelvin] (
A
115), you can press the
button to change the white balance mode temporarily. Press the button again to return to the previous white
balance mode.
Cu s tom White Balance
1 S et the AWB s witch to OFF and the
WHITE BAL. s witch to either A or B.
• To apply the stored custom white balance
setting as is, the rest of the procedure is
not necessary. To set a new custom white
balance, continue the procedure.
2 Point the camera at a gray card or white
object s o that it fill s the center of s creen.
• Use the same lighting conditions you plan
to use when recording.
3 Pre ss the
Å
button.
• The
Å
A or
Å
B icon will flash quickly.
• Make sure the gray card or white object
fills the center of the screen until the
procedure is completed.
• Once the icon stops flashing, the
procedure is completed. The setting is
retained even if you turn off the camera.
NOTES NOTES
• Readjust the custom white balance if the light source or ND filter setting changes.
• Very rarely and depending on the light source,
Å
may keep flashing (it will change to a slow flashing). In that
case, change the subject brightness and adjust the custom white balance again.
• After the camera registers a custom white balance, the color temperature or CC value may appear in gray. This
indicates that the value registered exceeds the range of values that can be displayed but the white balance is
correctly calibrated and you can continue shooting.
White balance mode/setting
Adjustment range
Color temperature (K) Color compensation (CC) value
¼
(daylight) 4,300 K to 8,000 K
–5 to +5
É
(tungsten lamp) 2,700 K to 3,700 K
È
(color temperature) 2,000 K to 15,000 K –20 to +20