Canon XF605, Инструкция по эксплуатации

Страница: 23 / 238

23
U s ing the LCD S creen
U s ing the LCD Screen
This section explains how to adjust the LCD monitor. You can adjust the direction of the screen as shown below,
as well as image settings such as brightness or contrast. Additionally, you can use the touch screen to select the
subject or perform a variety of settings using direct touch control (
A
49).
1 Open the LCD monitor 180 degree s (
햲
) and adju s t to the de s ired angle (
햳
).
2 You can al s o place the LCD monitor s o that it face s the s ubject.
NOTES
• You can adjust the brightness, contrast, color saturation, sharpness and luminance of the LCD screen with the
respective settings in the > [
¢
Monitoring Setup] menu (
A
190).
• In CAMERA mode, you can use the > [
¢
Monitoring Setup] > [B&W Image: LCD] setting to change
the image on the screen to black and white display. Even when the captured image is displayed in black and
white, onscreen displays and icons will be shown in color.
• You can use the > [
B
System Setup] > [Touch Screen Response] setting to adjust the LCD monitor’s
response to touch input.
• Adjusting the brightness does not affect the brightness of recordings.
• When the LCD panel is rotated 180 degrees toward the subject, you can set > [
¢
Monitoring Setup]
> [LCD Mirror Image] to [On] to flip the image horizontally so it shows a mirror image of the subject.
• For details about how to take care of the LCD monitor, refer to
Handling Precautions
(
A
219),
Cleaning
(
A
221).
햲
햳