Canon XF605, Инструкция по эксплуатации

Страница: 110 / 238

Infrared Recording
110
Infrared Recording
You can use the infrared mode to record in very dark situations using available infrared light. You can also use the
camera's infrared light to make the recordings even brighter, and select the color for the picture (white or green).
1 S et the INFRARED s witch to ON.
•
;
and
=
appear on the screen.
2 > [
v
Camera S etup] > [IR Rec Color] >
De s ired option.
3 To turn on the infrared light, s elect >
[
v
Camera S etup] > [IR Light] > De s ired option.
• When the infrared light is on,
=
changes to .
Option s
[Toggle]: Allows you to turn the infrared light on and
off using an assignable button. Set an
assignable button (
A
115) to [IR Light] in
advance and press the assignable button
to turn the infrared light on/off.
[Always On]: The infrared light is always on while the camera is in infrared mode.
[Always Off]: The infrared light is always off.
NOTES NOTES
• When infrared recording is activated, the following changes take place.
- The camera switches to automatic gain and shutter speed adjustment, the aperture is fixed at maximum
aperture, and the ND filter is retracted and cannot be used.
- The AGC limit, light metering, AE shift and white balance settings cannot be used.
- When the camera switches to infrared mode, the autofocus may be activated momentarily and the focus
point may change. Check that the focus is correct.
• Depending on the light source, autofocus may not work well while zooming.
• In infrared mode the camera's sensor is considerably more sensitive to near-infrared light. Do not point the
lens at strong light or heat sources when infrared recording is activated. If there are such light/heat sources in
the picture, we recommend shielding the lens before switching the camera to infrared mode.
• If you set an assignable button to [IR Rec Color] (
A
115), you can press the button to change the color of the
recorded picture.