Canon XF300, Инструкция по эксплуатации

Страница: 79 / 213

79
Recording 3
Zooming
Approximate zoom speeds
(grip zoom rocker)
* When the zoom speed is too fast (less than 2 seconds end-to-end), the camcorder will have more trouble focusing automatically
while zooming.
Using the Handle Zoom Rocker
Use the ZOOM SPEED switch and functions in the [
l
Camera Setup]
[Zoom] submenus to set the zoom speed.
Move the zoom rocker toward
Q
to zoom out (wide-angle) and
toward P to zoom in (telephoto).
Setting the Zoom Speed
Refer to the following table for approximate zoom speeds of the entire
zoom range (end to end).
1 Set the ZOOM SPEED switch to H or L.
• Move the ZOOM SPEED switch to OFF to deactivate the zoom
rocker on the handle. In such case, the rest of this procedure is not
necessary.
2 Open the zoom [Speed Level] submenu.
[
l
Camera Setup] [Zoom] [Speed Level]
3 Select [Fast], [Normal] or [Slow] and then press SET.
4 Open the zoom [Handle Rocker] submenu.
[
l
Camera Setup] [Zoom] [Handle Rocker H] or [Handle
Rocker L].
5 Select the desired level and then press SET.
[Grip Rocker]
setting
[Constant Speed]
setting
[Speed Level] setting
[Slow] [Normal] [Fast]
[Constant]
[1] (slowest) 5 min. 3 min. 1 min.
[16] (fastest) 4.5 sec. 2.5 sec. 1.8 sec.*
[Variable] – 4.5 sec. to 5 min. 2.5 sec. to 3 min. 1.8 sec.* to 1 min.
[
l
Camera Setup]
[ Zoom]
[ Speed Level]
[ Normal]
[
l
Camera Setup]
[
Zoom]
[Handle Rocker H 16]
[Handle Rocker L 8]
COP
Y