Canon XF300, Инструкция по эксплуатации

Страница: 72 / 213

Recording
72
3
Using the ND Filter
Using the ND Filter
Using the ND filters allows you keep the aperture within an appropriate
range when recording in bright surroundings*.
* When recording in bright surroundings, the camcorder closes down the aperture.
This may cause the picture to appear blurred depending on the zoom position.
Using the ND filter or setting a faster shutter speed can reduce such blur.
Set the ND FILTER switch to the desired setting.
• The filter setting appears on the left side of the screen.
ND Filter Settings
NOTES
• During automatic aperture control (
0
69), an ND filter warning may be
activated to indicate that the current setting is not appropriate. Perform
the action described in the following table.
• Depending on the scene, the color may change when turning the ND
filter on/off. Setting a custom white balance (
0
75) may be effective in
such case.
Operating modes:
Switch setting Screen display
OFF No display
1 [ND1 1/4]
2 [ND2 1/16]
3 [ND3 1/64]
Warning What to do
Camcorder
(onscreen display) [ND CLR] (flashes) Set the ND FILTER switch to OFF.
[ND1 1/4] (flashes) Set the ND FILTER switch to 1.
[ND2 1/16] (flashes) Set the ND FILTER switch to 2.
[ND3 1/64] (flashes) Set the ND FILTER switch to 3.
One of the above
indications appears in
red The ND FILTER switch is between two
positions. Set it correctly to the desired
position.
RC-V100 Remote
Controller
(optional) One of the ND filter
indicators flashes
slowly (once per
second) Set the camcorder's ND FILTER switch
to the number of the indicator that is
flashing.
One of the ND filter
indicators flashes
quickly (2 to 3 times
per second) The camcorder's ND FILTER switch is in
between two positions. Set it correctly
to the desired position.
COP
Y