Canon XF300, Инструкция по эксплуатации

Страница: 136 / 213

Playback
136
5
Playback
v Switching Between the CF Card Slots
If both CF card slots contain a CF card, you can switch between them as
necessary.
Press the SLOT SELECT button.
• The access indicator of the selected CF card slot will illuminate in
green.
Switching to Other Index Screens
All of the clips on a CF card can be accessed from the clip index screen.
However, you can switch to other index screens that show only clips with
an
e
mark ([
e
Mark] index screen), clips with a
Z
mark ([
Z
Mark]
index screen), or photos* ([Photos] index screen).
* Photos are saved on the SD card.
1 Press the INDEX button.
• The index screen selection menu appears.
2 Select the desired index screen and then press SET.
• The selected index screen appears.
• Select [Cancel] instead to cancel the operation.
• Press the INDEX button again to return to the clip index screen.
1 Currently selected CF card
slot (
0
43)
2 Clip thumbnail (
0
150)
3 Relay recording: Appears
when a clip begins on one CF
card and continues on the
other. (
0
43)
4 Shot mark (
0
103, 140)
5
e
mark/
Z
mark (
0
143)
6 Recording date (month and
day only) and time
7 Orange selection frame
8 Recording date and time
9 Clip name (
0
47)
10 Embedded custom picture file
(
0
119)
11 Bit rate and resolution (
0
53)
12 Frame rate
13 Total recording time
14 Time code of thumbnail
15 Special recording mode
(
0
105)
16 Clip number / Total number of
clips
Operating modes:
COP
Y