Canon XF200, Инструкция по эксплуатации

Страница: 45 / 246

45
Remote Operation of the Camcorder
Eng
lis
h
Using the Optional RC-V100 Remote Controller
You can attach the optional RC-V100 Remote Controller to control the camcorder (including advanced recording
functions) from a distance. In addition to turning the camcorder on and off and navigating the menus, while
recording you can control various camera functions, such as aperture, shutter and zoom, and custom picture
settings, like knee and sharpness.
The connection cable supplied with the RC-V100 is required to connect the RC-V100 to the camcorder's
REMOTE terminal.
1 Turn off the camcorder and connect the optional RC-V100 Remote
Controller to the camcorder.
• For details, refer to the instruction manual of the RC-V100.
2 Turn on the camcorder in mode and open the [REMOTE Term.]
submenu.
[
w
Other Functions]
>
[REMOTE Term.]
3 Select [RC-V100] and then press SET.
Options
[RC-V100]: Select this option to use the optional RC-V100 Remote Controller.
[Standard]: Select this option to use commercially available remote controls.
NOTES
• The camcorder’s ND filter cannot be changed using the ND button on the remote controller.
• When the camcorder is set to full auto mode (
A
49), settings related to the aperture, gain, shutter speed and
white balance (except for [R Gain] and [B Gain] in the custom picture's [White Balance] settings) cannot be
changed using the remote controller.
• Custom picture settings can be changed using the remote controller only when an appropriate custom picture
file is selected (
A
132).
Connection cable
(supplied with the RC-V100)
[
w
Other Functions]
[REMOTE Term.]
[Standard]
COP
Y