Canon WUX7000Z, Руководство пользователя

Страница: 131 / 240

131
Menu Description
Men
u
Gu
ide
Men
u
De
scr
iption
Aspect
> [Input settings] > [Aspect]
Select a projection aspect ratio for images.
The
ASPECT button on the remote control can also be used to select the [Aspect]
settings.
Menus that are not available are grayed out or hidden.
Auto PC
> [Input settings] >
[Auto PC]
Automatically adjusts display position misalignment and screen flickering when the
input signal is [Analog PC-1] or [Analog PC-2].
Input signal select
> [Input settings] > [Input signal select]
Select a suitable resolution if Auto PC does not project computer images correctly
when the input signal is [Analog PC-1] or [Analog PC-2].
Select the input signal that matches the computer resolution. Press the
OK button
to confirm the setting, and then press the MENU button.
Option Function
Auto
An image is projected at the aspect ratio of the input signal.
Suitable for most projection.
16:10 The image is projected using an input signal aspect ratio of 16:10.
16:9 The image is projected using an input signal aspect ratio of 16:9.
4:3 The image is projected using an input signal aspect ratio of 4:3.
Zoom
This cuts the upper/lower or left/right part of the screen according
to the screen aspect and zooms in or out of the center of the
image.
True size
The image is projected with the original resolution of the input
signal.
• For LAN and USB input, [Auto] is selected automatically.
• Different contents are displayed for different screen aspects or input signal types.
• A screen aspect setting of [16:10] cannot be selected for component signals.
If the Auto PC adjustment is insufficient, perform the following operations.
• Select the input signal that matches the computer resolution from [Input signal select].
• If adjustment remains insufficient, adjust [Total dots], [Tracking], [Horizontal/Vertical
position] and [Horizontal/Vertical pixels] in [Input signal settings] ( P132 ).
• For supported signals, see the table on page 219 – 220 .
For supported signals, see the table on page 219 – 220 .