Convenient Features
73
Basic Guide
Conven
ien
t Fe
atur
es
Projecting a Test Pattern from the Menu
Even without any input signals, the projector can project a test pattern. Test
patterns can be projected during installation to check how the projector is installed.
For details on projecting test patterns, see “Install settings” (
Set Power-Saving Settings
Set power-saving settings as needed.
The following four settings are available. For details, refer to the page describing
each function.
• Lamp mode (
Adjust lamp and fan power consumption in the image mode.
• Power management mode (
Automatically turns off the lamp or the power after a certain period if the projector
is idle without an input signal.
• Power management duration (
Specify the period after which the lamp or the projector should go off
automatically if left idle without an input signal when [Power management mode]
is set to [Lamp off] or [Standby].
• Network standby settings (
)
Conserve energy in standby mode, as needed.