165
Maintenance
Ot
her
In
fo
rm
at
ion
Ma
in
te
na
nc
e
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
•
Only the [ ], [ ],
OK
,
POWER
,
FOCUS
,
ZOOM
and
LENS SHIFT
buttons are
available while this screen is displayed.
•
When you press the
POWER
button, “Push POWER button again to turn off
power.” message appears.
•
After this screen has been displayed for 10 seconds and disappeared, all buttons
become operable.
•
This message will not be displayed again if you select [No] in response to the
message “Do you want to display this message again?”.
3,000 hours or more
If a lamp replacement message is displayed, refer to “Lamp Replacement
Procedure” (
).
•
Only the
POWER
,
OK
,
FOCUS
,
ZOOM
and
LENS SHIFT
buttons are available
while this screen is displayed.
•
When you press the
POWER
button, the “Push POWER button again to turn off
power.” message appears.
•
When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
•
You can check the usage time of the lamp in [Lamp counter] in the [System
settings] menu. (
)
•
This screen is not displayed when [Lamp warning display] is set to [Off]. (
)
