Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen
52
4
Use the [ ] / [ ] buttons to move the image.
5
When the image fits the screen, press the OK button.
Resetting the Image Shift
Perform the following steps to reset the image shift adjustment. Access the
[D. image shift adjustment] window and press the
D.SHIFT/KEYSTONE
button to
display the [D. image shift reset] window. Next, select [OK] with the [ ] button, and
then press the
OK
button.
Select the Aspect
Select [Aspect] based on the input signal type, aspect ratio of the screen and
resolution. For more details about aspect ratios, refer to “Relationship between Aspect
and Screen Aspect” on
.
Types of Aspect Ratios
Auto
An image is projected at the aspect ratio of the input signal. Select this mode for
normal image projection.
16:10
The image is projected using an input signal aspect ratio of 16:10. Select this if an
image of 16:10 aspect ratio cannot be correctly projected in [Auto] mode.
16:9
The image is projected using an input signal aspect ratio of 16:9. Select this if an
image of 16:9 aspect ratio cannot be correctly projected in [Auto] mode.
[ ] button:
Moves the image right.
[ ] button:
Moves the image left.
Remote control
Projector
Screen
