Part Names
26
Top Control
KEYSTONE button
Corrects keystone distortion. (
[ ] [ ]: For keystone adjustment.
Press
D.SHIFT/KEYSTONE
and then
AUTO
SET
to adjust the keystone automatically.
• Moves the image up, down, left, and right
when [16:9 D. image shift] or [4:3 D. image
shift] is selected. (
)
• [ ], [ ], [<], [>]:Moves an image to the de-
sired position.
<
<
<
<
MENU button (
Displays a menu on
the screen.
AUTO SET button (
)
Performs input signal set-
tings, auto adjustment on fo-
cusing, keystone distortion,
screen color correction, and
so on.
FOCUS button (
Adjusts focusing.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
Press
FOCUS
and then
AUTO SET
to adjust the focusing automatically.
<
<
ZOOM button (
)
Adjusts the image size.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
<
<
OK button (
)
Determines the item selected
from the menu.
INPUT button (
)
Switches among input signals.
WARNING lamp (
Flashes red when a problem has
been detected on the projector.
POWER button/lamp (
,
)
Turns the projector on or off.
Green: The projector is on.
Flashing green: The projector is being turned on.
Red: The projector can be turned on.
Flashing red: The projector is being turned off
(the lamp is being cooled).
Pointer/VOL button (
Adjusts the sound volume.
[<]: Decreases the volume.
[>]: Increases the volume.
Selects the upper, lower, left
or right item in the menu.
AUTO PC button (
Adjusts tracking and so on automatically in
accordance with signal from a computer
when ANALOG PC-1 or ANALOG PC-2 is
selected.
LED illumination lamp (
)
Indicates the projector status with LEDs.
Blinking from the left: The projector is
being turned on.
Blinking from the right: The projector is
being turned off.
Middle LED flashing slowly: The image is
being blanked out.
Left and right LEDs flashing slowly: The
image is freezing.
