15
Using the Flash
In order to evenly distribute light from the flash,
please attach the diffusion plate.
Attaching the Diffusion Plate
1
Thread the cord through the mount
as shown.
2
Insert the edge of the diffusion
plate into the indentation.
• Do not scratch the surface of the diffusion
plate, as this may prevent light from the flash
from being diffused properly.
• Attach the diffusion plate for flash
photography because image edges may
darken otherwise. Please note, however,
that the effectiveness of the diffusion plate
may be impaired if the subject is too close to
the camera.
Diffusion
Plate
Indentation
COP
Y
Содержание WP-DC35
