Canon WFT-E6, Руководство пользователя

Страница: 4 / 37

4
Turn off the camera before attaching the transmitter. The transmitter is powered by the camera.
Make sure the camera’s battery pack is sufficiently charged before using the transmitter.
1
Turn off the camera.
2
Attach the transmitter.
Open the camera’s system extension terminal
cover (
햲
), align the transmitter’s plug with the
system extension terminal as shown in the
illustration and firmly push the transmitter in (
햳
).
Turn the tightening screw in the direction of the
arrow until it stops to securely attach the
transmitter (
햴 ).
3
Attach the supplied Extension Unit
Attachment Bracket.
Position the bracket so it covers the transmitter’s
attachment pin and tighten the screw.
4
Turn on the camera.
Removal
Turn off the camera.
Loosen the extension unit attachment bracket’s screw and remove the extension unit
attachment bracket.
Loosen the transmitter’s tightening screw until it spins freely.
Remove the transmitter from the camera’s system extension terminal and close the
terminal’s cover.
Attaching to the Camera
햳
햲
햴
햳
햲
Î