manualshive.com logo in svg

Canon W8400 Series, Руководство по обслуживанию, Страница: 46 / 224

Поделиться
Скачать
Canon W8400 Series Скачать руководство пользователя страница 46

Chapter 1  

1-30

1.7.3.2 Firmware Confirmation

0009-1489

Firmware has been downloaded to each of a System Controller and Engine Controller.

When replacing each board with the one with Service Parts, confirm that each firmware is the latest version. If it is not the latest version, please update it

to the latest version.

Reference:

For how to upgrade each board, please refer to 

TROUBLESHOOTING> Version Up

.

1.7.3.3 Precautions Against Static Electricity

0009-1490

Certain clothing may generate static electricity, causing an electrical charge to build up on your body. Such a charge can damage electrical devices.

To prevent this, discharge any static buildup by touching a grounded metal fitting before you start disassembling the printer.

1.7.3.4 Precautions for Disassembly/Reassembly

0009-1492

The precautions for disassembly/Reassembly are described in DISASSEMBLY/REASSEMBLY.

1.7.3.5 Self-Diagnostic Feature

0009-1493

The printer has a diagnostic feature which analyzes printer problems (which may occur).

The diagnostic results will be displayed on the display and indicated by a light.

For detailed information, see ERROR CODE.

1.7.3.6 Disposing of Lithium Battery

0009-1494

Dispose of the lithium battery according to local regulations.

MEMO:

This printer has a lithium battery mounted on the engine controller. The lithium battery is not replaceable.

Содержание W8400 Series

































































































































































































































Отзывы:

Нет отзывов