Canon VK-16 v2.1, Руководство администратора

Страница: 251 / 288

9-9
T
rou
b
lesh
o
o
ting
Messages List
Operation Messages and Error Messages
Error messages and operation messages displayed during normal recording and operation of VK-64/VK-16 are
shown below.
Video Windows Error Messages
Messages Cause
Video window
Connecting to camera.
The viewer is in the process of connecting
to the camera.
Could not connect to camera.
The viewer cannot connect to the camera
server and the live video cannot be
displayed.
Getting camera control.
The message is displayed before starting
camera control after sending a camera
control request.
Can't get camera control.
Another user with higher user authority has
already been controlling the camera when
you sent a camera control request.
Control will be lost in <count down> sec.
If the camera is left uncontrolled for 30
seconds, this message is displayed and a
countdown starts. It counts down starting
from 10 to 0 by 1 second.
Camera control lost.
Time out occurred while the viewer is
controlling the camera or a camera control
request was sent from another user with
higher user authority. This message will
close in three seconds.
No recorded video.
No recorded video exists during the time
where the Playhead is positioned now,
when playing recorded video.
Can't connect to storage server.
It is unable to connect to the storage server
to play recorded video.
Not set up to record.
You attempted to play recorded video with
the camera set to [
Do not Record]
Please wait
It may take time until the MPEG-4 live/
recorded video is displayed. This message
will close in several seconds.
VK-64_SysManual_Ev21.book 9 ページ ２００９年３月２日 月曜日 午後１時３分
CO
PY