Canon VIXIA HFM41, Инструкция по эксплуатации

Страница: 143 / 204

External Connections
Š 143
Converting Scenes into Standard Definition from a Story by Rating
1 Open the gallery and bring the desired story to the front.
• Check that you have selected the
f
tab (built-in memory) or
4
tab
(memory card
X
).
2 Select the rating of the stories you want to convert.
3 Press
Z
and continue the conversion to standard definition
from step 5 in the previous procedure (
0
140).
NOTES
• When converting scenes from a story:
- All the scenes are merged into one converted SD movie.
- If the converted SD movie is too large, it will be split into smaller 10-
minute long movies.
- The maximum total playback time of the scenes to be converted is 2
hours and 30 minutes.
Converting Only Part of a Scene or Story
1 Play back the scene or story that you want to partially convert.
Check that you have selected a scene recorded in the built-in memory
or on memory card
X
.
2 Pause the playback where you want the converted SD movie to
begin.
3 Press
Z
and continue the conversion to standard definition
from step 5 in the previous procedure (
0
140).
The video from the playback pause until the end of the scene/story (or
up to a maximum of 10 minutes, in case of longer scenes/stories) will
be converted to standard definition.
[
b
]
8
[ Gallery]
8
Desired story
[Story Details]
8
[Play by Rating]
8
Desired rating
8
[
f
]
COP
Y