148
Additional Information
System Setup 2
1
Option not available when the camcorder is connected to an HDTV using an HDMI
cable.
2
Option available only from the original movies index screen.
[Wireless Remote Control]:
Allows the camcorder to be operated with the
wireless controller.
[Notification Sounds]:
A beep will accompany some operations like turn-
ing on the camcorder, the self-timer countdown, etc.
[Power Saving Mode]:
In order to save power when the camcorder is
powered by a battery pack, it will automatically shut off if left without any
operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto power
off] will appear.
• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start] setting.
[Quick Start]:
Select whether to activate the Quick Start function (
when you close the LCD panel in a recording mode and the length of time
after which the camcorder will end the standby mode and shut off auto-
matically.
Menu item
Setting options
[Wireless Remote
Control]
[
On]
, [
Off
]
z
z
z
z
–
[Notification Sounds]
[
High Volume]
,
[
Low Volume], [
Off]
z
z
z
z
–
[Power Saving Mode]
[
On]
, [
Off]
z
z
z
z
–
[Quick Start]
[
Off],
[
10 min]
,
[
20 min], [
30 min]
z
z
–
–
–
[Control for HDMI]
1
[
On],
[
Off]
z
z
z
z
–
[Initialize
/
]
[Built-in Mem.], [Mem. Card]
z
z
z
2
z
[Quick Initialization],
[Complete Initialization]
[Photo Numbering]
[
Reset],
[
Continuous]
z
z
z
z
–
[Firmware]
–
–
–
–
z
–
CO
PY
