Canon VIXIA HF M300, Инструкция по эксплуатации

Страница: 142 / 210

142 Š
External Connections
Using the software
See ‘ImageMixer 3 SE Software Guide’ (PDF file).
Converting Scenes into Standard Definition
1 Power the camcorder using the compact power adapter.
2 Make sure there is a memory card in the camcorder with sufficient
available space.
3 Open the [Original], [Playlist] or [Video Snapshot]
→
[Original]/
[Playlist] index screen.
• Check that you have selected the
f
tab (built-in memory).
• [Original] or [Video Snapshot]
→
[Original] index screen: To convert all
the scenes recorded on a specific date, narrow down the scenes
shown to scenes recorded on that date (
0
55).
4 Touch [
a
] to open the scene selection screen.
When you convert scenes from the [Playlist] index screen (including the
playlist of video snapshot scenes), you cannot select individual scenes;
instead, the entire playlist will be converted. Skip directly to step 6.
5 Touch on the individual scenes you want to convert.
• A checkmark
O
will appear on scenes selected. Touch a selected
scene again to remove the checkmark.
• To select all the scenes at once: Touch [Select All] instead of
touching individual scenes. (Remove in advance any checkmarks
from scenes you may have selected individually.)
6 Press
Z
and touch [Yes].
• If a copyright notice appears, read it
carefully and touch [OK] if you agree.
• Before touching [Yes], you can touch
[
5
] to change the conversion
settings as described below.
• Touch [
B
] to interrupt the operation
while it is in progress.
Operating modes: