Canon VIXIA GX10 Скачать руководство пользователя страница 71

Страница: 71 / 155

ing the Mini Advanced

hoe

Using the Mini

dvanced

hoe

Using the mini advanced shoe, you can attach to the camcorder a range of optional accessories (

142) to

expand its functionality. For details about how to attach and use the accessories, refer also to the instruction
manual of the accessory used.

1 Open the mini advanced

hoe cover.

2 Attach the optional acce

ory to the mini advanced

hoe.

• When a compatible accessory is attached to the mini advanced

shoe,

will appear on the screen.

NOTES

• Accessories designed for the Advanced Accessory Shoe cannot be used with this camcorder.

Look for video accessories bearing this logo to ensure compatibility with the

mini advanced

shoe

Using an External Video Light

You can use the optional VL-5 Video Light when you need to record movies in dark locations.

Attach the optional video light to the mini advanced

hoe.

•

will appear on the screen when you turn on the optional video light (ON or AUTO). For details about using

the optional video light, refer to the instruction manual of the VL-5.

Operating modes:

Example: Attaching an optional DM-100
Directional Stereo Microphone.

Содержание VIXIA GX10




























































































































































Результаты поиска

Содержание VIXIA GX10

Отзывы:

Canon VIXIA GX10, Инструкция по эксплуатации, Страница: 71 / 155

Результаты поиска

Содержание VIXIA GX10

Отзывы: