Canon VIXIA GX10, Инструкция по эксплуатации, Страница: 70 / 155

S etting the U s er Bit
70
S etting the User Bit
The user bit display can be selected from the date or the time of recording, or an identification code consisting of
8 characters in the hexadecimal system. There are sixteen possible characters: the numbers 0 to 9 and the
letters A to F. The user bit can be output from the HDMI OUT terminal.
Setting an Hexadecimal Code
1 Open the u s er bit s etting s creen.
>
[
3
#
Recording Setup]
>
[User Bit Type]
>
[ Setting]
>
[
i
]
• The user bit setting screen appears with an orange selection frame on the leftmost digit.
• Touch [Reset] to reset the user bit to [00 00 00 00] and return to the previous screen.
2 Touch [
Í
] or [
Î
] to s et the fir s t character and then touch the field next to it to s elect it.
• Change the rest of the characters in the same way.
3 After completing all the character s of the u s er bit, touch [OK].
• Touch [Cancel] to close the screen without changing the user bit.
Using the Date or Time
1 S elect [U s er Bit Type].
>
[
3
#
Recording Setup]
>
[User Bit Type]
2 Touch [ Date] or [ Time] and then touch [
X
].
Operating modes: