Canon VB-S30VE, Руководство по эксплуатации

Страница: 148 / 238

148
External Device Input
You can set the operation to be performed when an event is triggered by input from an external device.
Note
An icon in the [Event and Input/Output] menu of the Camera Viewer will indicate when there is an external device input event (P. 76).
[External Device Input Event]
Select whether to use the input from an external device, such as a connected sensor, as an event.
[Operation Mode]
Select the circuit condition to suit the signal input from the connected external device.
When [Normally Open] is set, an active event occurs when the terminals of the external device close, and an inactive event
occurs when the terminals open.
When [Normally Close] is set, an active event occurs when the terminals of the external device open, and an inactive event
occurs when the terminals close.
[Active Event Operation]
Select the operation to be performed when an active event is triggered.
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when an
active event is triggered.
[Inactive Event Operation]
Select the operation to be performed when an inactive event is triggered.
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when an
inactive event is completed.
[Ongoing Active Event Operation]
Select the operation to be performed during an active event. This can only be set when [Active Event Operation] is set to
[Enable].
If [Enable] is set, [Video Record] and [E-mail Notification] will be executed according to their settings during the active
event.
[Preset]
If you specify a preset, the camera angle will automatically move to the preset location when an external device input event
is triggered.
It is necessary to set presets beforehand with [Camera] > [Preset] (P. 118).
[Video Record]
Select whether to record video depending on the event.
If you select [Enable] and an external device input event is triggered, video will be transmitted to the recording destination
specified in [Video Record] > [Upload] > [Video Record Action] (P. 141).
[E-mail Notification]
Select whether to send an e-mail notification depending on the event.
If [Enable] is selected, e-mail notification will be performed when an external device input event is triggered.
To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 145) beforehand.
[External Device Output for Active Event]
Select whether external device output is active or inactive when an active event is triggered.
[External Device Output for Inactive Event]
Select whether external device output is active or inactive when an inactive event is triggered.
[Audio Playback at Active Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back at active events for the external device input.
[Audio Playback at Inactive Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back at inactive events for the external device input.
[Sound Clip]
Select the sound clip when [Audio Playback at Active Event] or [Audio Playback at Inactive Event] has been set to
[Enable].
Important
When the camera is moved to a preset position specified in the [Preset] settings, camera control privileges are released, even if the user
has obtained those camera control privileges using the Camera Viewer or other camera control applications.
S30VE S910F
S30VE S910F