Canon VB-S30D MKII Скачать руководство пользователя страница 121

Страница: 121 / 185

Recorded Video Utility

121

Adm

in T
ools

Note

• [Real Time] can be selected only for playback of downloaded

videos.

• [Not Downloaded] or [Partially Downloaded] videos may not be

played back in the order they were recorded.

Slider/Playback Control

Drag the slider to change playback position.

The following buttons can also be used for playback.

[

ave Playback Frame As]

Video frames that are being played back can be saved as

a separate file.

For H.264

Select the [Enable H.264 playback] checkbox to play

H.264 video in the [Playback Videos] area.

The Software Product License Agreement dialog box

appears. Click [Yes] to accept the terms of the license

agreement. The decoder is downloaded from the camera,

enabling H.264 video playback.

[Recording Date & Time]

Displays the date and time of video frames that are being

displayed.

[Playback File No.]

Displays file numbers and total number of video files that

are being displayed.

Note

• The H.264 video playback interval varies depending on the

download status.

If the download status is [Downloaded], each frame is played
back in real time interval according to the recording time. For

empty frames, the preceding frame is displayed.

If the status is [Not Downloaded] or [Partially Downloaded],
empty frames are skipped upon playback. If a file is played

back while still downloading, playback may momentarily pause

when switching files, depending on the network environment.

• [Not Downloaded] or [Partially Downloaded] videos may not be

played back in the order they were recorded.

Slider/Playback Control

Drag the slider to change playback position.

The following buttons can also be used for playback.

Button

Description

Move to first frame

Move to previous frame

Fast rewind

Playback

Pause

Fast forward

Move to next frame

Move to last frame

Button

Description

Move to first frame

Move to previous frame

Playback

Pause

Move to next frame

Move to last frame

Содержание VB-S30D MKII


























































































































































































Результаты поиска

Содержание VB-S30D MKII

Отзывы:

Похожие инструкции для VB-S30D MKII

Бренды по названию

Популярные бренды

Canon VB-S30D MKII, Руководство по эксплуатации

Результаты поиска

Содержание VB-S30D MKII

Отзывы:

Похожие инструкции для VB-S30D MKII

Бренды по названию

Популярные бренды