Canon VB-R13VE Скачать руководство пользователя страница 92

Страница: 92 / 263

About Each Setting Page

This section will give an overview of each item in the Setting Menu and each submenu.

Each of the [Basic], [Video and Audio], [Video], and [Video Record] menus has a [Video] submenu, but the functions are all

common. The functions can be set in any of the menus and the settings will be reflected in all of the [Video] submenus.

• Network (P. 96)

Network settings for connecting to the camera.

• User Management (P. 100)

Use this to change administrator account information, add/

delete authorized users and set privileges for users.

The settings of this item are the same as those in [Security]

> [User Management]. Settings configured on one page

are also reflected on the other.

• Date and Time (P. 102)

Camera date and time settings.

• Video (P. 104)

General video settings, such as the size and quality of

video transmitted from the camera.

• Viewer (P. 107)

Configure the startup, authorization, and view of the

Viewer.

Basic

Camera

• Camera (P. 108)

Settings for the camera name and external input/output

devices, and for use and installation of the camera.

• Camera Angle (P. 45)

After installing the camera, set the camera angle, while

checking the displayed video.

• Initial Setting (P. 112)

Sets initial settings, such as video quality compensation, at

camera start up.

• Day/Night Mode Focus (P. 120)

Set the focus positions for when Day/Night Mode are

switched.

• Panorama (P. 123)

Configure the creation and management of panorama

images.

• Restrict View (P. 127)

Set the range that the camera can capture.

• Preset (P. 131)

• Preset Tour (P. 134)

Configure the settings for automatically touring with

multiple presets registered in advance.

H651

R13 R12 M50

Содержание VB-R13VE








































































































































































































































































Результаты поиска

Содержание VB-R13VE

Отзывы:

Похожие инструкции для VB-R13VE

Бренды по названию

Популярные бренды

Canon VB-R13VE, Руководство по эксплуатации

Результаты поиска

Содержание VB-R13VE

Отзывы:

Похожие инструкции для VB-R13VE

Бренды по названию

Популярные бренды