Canon VB-R13VE, Руководство по эксплуатации

Страница: 198 / 263

198
[Sound Clip Name]
Select the sound clip to be played back. You must register the sound clip with Sound Clip Upload 1 to 3 in [Video and
Audio] > [Audio] (P. 148) on the Setting Page in advance.
[Volume]
Set the volume for the sound clip.
(5) External Device Output Operations
[External Device Output for ON Event]
Select this to start or pause output to an external device when the mode becomes “detected”, and to select the output
destination (output 1 or 2) and operation (active or inactive).
[External Device Output for OFF Event]
Select this to start or pause output to an external device when “detected” mode ends, and to select the output
destination (output 1 or 2) and operation (active or inactive).
Restarting Intelligent Function
If the background video has changed while you were specifying settings or detection results are not as specified, restart
the Intelligent Function.
R13 M50 H652 H651
1
If you have not yet obtained the camera control privileges, click the [Obtain/Release Camera Control Privileges]
button and obtain the control privileges.
2 Click [Restart intelligent function].
Important
It takes several tens of seconds for the Intelligent Function to restart. No detection is performed while restarting.