Canon VB-M640V, Руководство по эксплуатации

Страница: 78 / 287

78
[LED S etting]
Select whether to enable or disable the camera operation status LED.
The LED will light for several seconds when starting the camera even if set to [Turn Off].
[Image Flip]
Select whether or not to vertically flip the video.
Select the setting suited to the camera installation method, such as ceiling mounting or placing on a desk.
Camera Position Control
Settings for camera use when there are no camera control restrictions for users or requests for camera control privileges.
[Restricted to Presets]
Restricts camera control of the camera angle, such as with VB Viewer, to presets, including the home position, for users
other than administrators.
[Camera Position without Control]
Select the camera operation when there are no users with camera control privileges.
If [Return to Home Position] has been selected, the home position of the camera must be set in advance with [Control for
Admin] > [Preset/Initial Setting] > [Preset Setting] > [Preset Registration] tab (P. 170).
External Input Device 1, 2
Enter each device name in order to identify the corresponding external input device being connected.
There are 2 external input device terminals on the camera.
[Device Name]
Enter the name of the device connected to the external input device terminal. Be sure to enter a name in [Device Name
(alphanumeric characters)].
External Output Device 1, 2
Enter each device name in order to identify the corresponding external output device being connected.
There are 2 external output device terminals on the camera.
[Device Name]
Enter the name of the device connected to the external output device terminal. Be sure to enter a name in [Device Name
(alphanumeric characters)].
M741 M740
R11 R10
R11 M 6 41 M741
R11 M 6 41 M741